Heating Maintenance in DC
Comfort, Safety, Savings – That’s Something You Can Warm Up To
During the year, your heating system accumulates dust and dirt, making it less efficient and costing you more in utility bills. Add the lack of regular furnace inspection and maintenance, and you can count on your furnace breaking down before you can say, “Winter is here!”
It’s important to us to make sure that doesn’t happen. Industry experts are forecasting that energy prices will skyrocket. Electric and gas rates have already risen and are expected to continue to rise.
An inspection and cleaning help your furnace run more efficiently and use less energy, saving you money. It’s the best thing you can do to guarantee a warm, worry-free, energy-efficient home through winter and into spring.
Here’s What Will Happen During Our Furnace Inspection
At F.H. Furr the safety of you, your family and your home are our first priority. Your Maintenance & Safety Inspection Technician will investigate and share with you, any & all safety related matters that we uncover. We will also identify any maintenance your system may need for maximum efficiency, comfort, reliability, and longevity. During your Maintenance & Safety Inspection, our service technician will perform a 36-point inspection of your home heating system that will take about an hour or so to complete. This includes, but is not limited to the following:
- Inspect air filtration system
- Run test to verify proper sequence of operation
- Check for safe combustion
- Flame rollout / hard ignition / back pressure
- Carbon Monoxide
- Gas pressure(s)
- Temperature rise – ensure within manufacturer specifications
- Test for gas leaks
- Clean the flame sensor
- Inspect the heat exchanger for corrosion, cracks, pinholes, deformities or carbon/soot.
- Inspect gas valve for corrosion, restriction of gas flow, and abnormal noise
- Inspect vent connectors for integrity, pitch, obstructions and leaks
- Inspect furnace controls and safety devices for integrity & proper operation
- Flush drain (90%+ efficient units only)
- Inspect electrical connections, wiring harness & disconnect (as applicable)
- Measure and document electrical parameters, such as
- Incoming voltage
- Amp draw of blower motor
- Amp draw of inducer motor
- Amp draw of Compressor (heat pump only)
- Amp draw of Electric backup heater (heat pump only)
- Investigate any improper resistance that may be found in the electrical circuit.
- Inspect capacitor(s) for integrity, corrosion and capacitance
- Inspect readily accessible ducts for integrity, cleanliness, and/or obvious air leaks
- Inspect blower for proper / adequate air flow.
- Includes Inspection of wheel, motor (& lubricate as needed)
- Check for cleanliness of indoor coil and secondary heat exchanger
- Check for cleanliness of the outdoor coil (heat pumps only)
- Vacuum loose debris from the blower and burner compartments
- Wipe clean the reachable areas of the unit cabinet
- Replace filter if/when provided by the customer while on-site at the time of inspection
- Check and calibrate thermostat as required
- Inspect the entire furnace/boiler for loose or worn parts and abnormal vibrations
- Test and adjust the unit for peak operating efficiency
- Check defrost cycle and reversing valve operation (heat pumps only)
- Check the crankcase heater for proper maintenance (heat pumps only)
- Check refrigerant level (heat pumps only)
- Check emergency heat systems for proper operation (heat pumps only)
Your F.H. Furr Maintenance & Safety Inspection, satisfies the manufacture’s requirements for annual inspection by a licensed contractor. It will also keep you informed on any additional maintenance that may be needed to keep your system running safely, reliably & efficiently for a long time.
Ready to schedule a heating tune-up? Call our team at (703) 540-4838 today.
Preventative Maintenance Tips
Investing in preventative maintenance with F.H. Furr ensures your heating system remains in top condition and provides peace of mind year after year.
Our Peace of Mind Comfort Program and service plans offer various benefits, including regular checks and tune-ups, priority service, and special repair discounts. These plans save you money in the long run and prevent the inconvenience of unexpected breakdowns.
Sign up for a maintenance plan by calling F.H. Furr at (703) 540-4838 today.
Why Choose Us?
Choosing F.H. Furr for your heating maintenance in the Baltimore, MD, area means enjoying:
- Industry-exclusive guarantees that ensure complete satisfaction
- Flat-rate pricing so you know what you’re paying upfront
- Expert technicians who are “Absolutely the Best” in the field
- 100% customer satisfaction guarantee
Our commitment to excellence and comprehensive service offerings make us the preferred choice for heating maintenance in Baltimore.
Schedule a heating tune-up in Washington, DC, by calling (703) 540-4838 today.
FAQs
How often should I have my heating system maintained?
Your heating system needs annual maintenance to ensure it operates efficiently, especially in the fall before the heating season begins in Baltimore, MD.
Can regular maintenance reduce my energy bills?
Regular maintenance can reduce energy bills by keeping your heating system running at peak efficiency, using less energy to heat your home.
What happens if I skip maintenance?
Skipping routine maintenance can lead to decreased efficiency, higher energy costs, increased repair expenses, and a shorter system lifespan. Regular maintenance is crucial for optimal performance and longevity.
Services
See Why Our Customers
say we are Absolutely
The Best
See Why Our Customers
say we are Absolutely
The Best
The Best
Excellence, efficiency, and an enduring spirit of service are three of the core values that keep our customers coming back. Our customers’ reviews explain the F.H. Furr difference better than we ever could.
At F.H. Furr, we take pride in hiring “Absolutely The Best” technicians. But don’t just take our word for it — read the rave reviews from our satisfied customers and find out why Baltimore trusts our team with all their HVAC, plumbing, and electrical needs.